Digitech Products

CNC Machine Networking Products

BT - 100

Specifications

  1. Bluetooth V2.0, class1
  2. SPP Profile
  3. Working Dist.= 100m by SAT- GOIR antenna                     =1000m by PAT - GOIR antenna
  4. Maximum Tx Power=+18dBm
  5. Receive Sensitivity= -88dBm
  6. Operating Temp.=-42 to +85℃
 

Features

  1. Transparent RS232 cable replacement
  2. Battery option available(on request)
  3. Compatible to all DNC software packages
  4. Plug ’n’ play device
  5. No IP setting required

LAN - RS-232 Converter

Specifications

  1. Ethernet Ports - 1 No.
  2. RS232- 1 No.
  3. Speed of Ethernet = 10X100 mbps
  4. Data bits 7 or 8, stop bit 1 or 2, parity E,N,O
  5. Flow control=H/W and S/w
  6. Baud rate up to 115200
  7. Network Protocol TCP
  8. Compatible to Windows OS
  9. Operating Temp. 0 to 55℃
 

Features

  1. Suitable for all types of CNC machines
  2. Drip feed possible
  3. Best suitable for Win Com DNC and CIMCO DNC
  4. Optical Isolation for RS232 of CNC is inbuilt

Digi-LDVR

Specifications

  1. Working voltage=240v
  2. Operating Temp.= 0 to 50℃
  3. Optical Isolation
 

Features

  1. Most ideal for increasing the length of cable of RS 232 Communication
  2. Tested for 1000meters of cable with 9600 baud rate
  3. Optical isolation: Built in

DIGI-HHT 22

Specifications

  1. Battery Powered, Compact code loader
  2. Number of RS232 ports=2
  3. QWERTY keyboard (touch type)
  4. Display = 40X2 LCD with backlit
  5. Core module=RCM 2020
 

Features

  1. CNC Code Loader
  2. Compatible to most CNC machines with RS-232 Edit, Send, & Receive functions.
  3. Designed for shop floor use with touch type key board
  4. Two RS-232 ports
  5. Software for down loading the files to PC is free.
  6. 2 MB User memory

Pen Drive Interface to CNC

Specifications

  1. Battery powered device
  2. Operating Temp. 0 to 45℃
  3. Display 4 line Function Keys=3 No.
  4. CNC communication parameters are settable
  5. External pen drive up to 8 GB
  6. Drip feed mode possible

Features

  1. Add external memory by any commercial USB Pen drive
  2. Compatible to most of the CNC Controllers.
  3. Communication parameters are settable
  4. Drip feed is supported.

ADAPTER

Specifications

  1. D type 9- pin
  2. D type 25- pin
  3. Indicators for +and- V
 

Features

  1. Most ideal diagnostic device designed for testing of RS 232 cable fault, RS232 working
  2. It can be used with any DNC system

Digi-Isolator

Specifications

  1. Works on 240 Volts
  2. RS-232 signals on 9 pin D type
  3. Surge supressor protection at mains input
 

Features

  1. In - Built optical isolation between RS-232 signals of input & output.
  2. Designed for safety of serial port of CNC.
  3. Any port can be input while other as output.
  4. Supports Hardware Handshake, RTS & CTS
  5. All signals are optically isolated from each other.
  6. Installed more than 800 units on CNCs.

Electronic Supervisor

Specifications

  1. Works With CIMCO – MDC
  2. Operating Voltage: 24V DC
  3. Audio Visual Setting By CIMCO MDC Software
  4. One Change Over Contact
 

Features

  1. Reset Key To Reset The Audio Visual Alarm

DNC WORKLINK

Specifications

  1. 12 V DC
  2. Operating temperature: 0 to 45 degree C
  3. Line 4. Functional keys - 4 nos
  4. communication parameter settable
  5. Direct interface of pen drive
  6. Drip feed mode possible
 

Features

  1. Add external memory by USB pen drive
  2. Works well with RS232 port of CNC
  3. Plug and Play devise
  4. Learning time 10 mins only